Here are some pictures of the stripped inner wheel wells. Each one of them requires a patch in the lower front corner. |
|
|
Here are a few shots of the trunk stripped and sealed with POR 15 sealer. |
|
|
|
|
Here are the trunk patches welded in place and sealed with the POR 15 sealer |
|
|
Wheel wells covered with Zero Rust. |
|
|
|
|
Trunk covered with Zero Rust. |
|
|
|
|
Initial shots of the right outer rocker panel removed. I am replacing the rocker panel with a full repo part.
I have decided to keep the rear upper portion of the old one attached and to cut the new panel to fit. This section will be hidden and the
old piece is solid. |
|
|
|
|
|
|